|
|
Post by ryanhuk on Dec 23, 2015 14:59:21 GMT 1
Reading up on the original service manual it mentions putting different size liners in the block (a10) up to either 4 or 5mm over bore, has anyone actually done this or more importantly can you source them anymore?
Thanks
|
|
|
|
Post by dirtynails on Dec 31, 2015 17:37:28 GMT 1
Not aware of them having liners.It's a cast iron block so I think you would just over-bore it & fit bigger pistons. Could be wrong though.
Your best bet is to ask a engine rebuilder
|
|
