timo
forum Member
Posts: 10
|
Post by timo on Jan 13, 2013 1:20:41 GMT 1
Hi all!
Are the front wheel brakes all the same at the N10 or is there any difference depending on the engine or year of manufacture?
If it's all the same, is the front wheel brake even the same as in the previous generations of the Cherry?
Cheers
Timo
|
|
datman
Senior Member
Posts: 799
Location: West Sussex/Surrey
|
Post by datman on Jan 13, 2013 2:16:45 GMT 1
possibly 2 types of brake on N10 but someone like Marky may have a better idea. Pads and pistons same as F10, caliper housing different, possibly also the disc is different.
E10 has different brakes completely. Hope that helps.
|
|
timo
forum Member
Posts: 10
|
Post by timo on Jan 14, 2013 11:12:28 GMT 1
Hi Will!
Thanks for your answer. The seller told me that there's this part id written: 32 932 304
I've never seen such an Datsun/Nissan part id, so I doubt that this is really one. Looks more like a general id of the manufacturer.
Cheers
Timo
|
|
datman
Senior Member
Posts: 799
Location: West Sussex/Surrey
|
Post by datman on Jan 15, 2013 2:00:12 GMT 1
indeed
|
|
Tero75
club Member
Posts: 75 
Location: Turku, Finland
|
Post by Tero75 on Jan 15, 2013 9:41:59 GMT 1
Will is right, there are two different types of front brake in N10 (or three if you clio the drum brake version).
A/E10, A12 and E13 have one type. The wheel bearings are smaller and different kind of strut. Also caliber housing and disk is different.
A14 and E15 have bigger wheel bearings and different strut.
They have same pistons and pads.
The only difference between brake disks is bolt pattern and about 1mm in offset!
|
|
timo
forum Member
Posts: 10
|
Post by timo on Jan 15, 2013 15:25:32 GMT 1
Tero75: Thank you for your detailed answer! This helps me a lot!  Cheers Timo
|
|
