|
Post by tutigard on Jan 23, 2013 5:17:45 GMT 1
Hello! I am new to the forum, and i'm Norwegian so i'm sorry for my poor english.
My questions: I have a nice little 100A. One owner car, in good shape, but it has been sleeping in a barn for the last 15 years before I talked the owner into selling it to me. The enginge has seen it's better days, and I would like to get some more power anyway, so a engine swab is the plan.
I also have a Nissan prairie with a E15 engine in "as-new" shape. (FWD) Is there posible to fit this enginge in my 100A? I guess it would be less job to fit a A14/15 engine but I dont have that at hand.
|
|
|
Post by Al Ramone on Jan 23, 2013 8:30:47 GMT 1
much much esaier to swap in a A14/A15 because you could use your exsiting gearbox.
i don't think the E series engine came with a gearbox that fits under the engine like the 100A does?
so you'd need to make it fit with the side mounted gearbox and make mounts for it. maybe you'd need a front sub frame from a E powered N10...?
|
|
Tero75
club Member
Posts: 75
Location: Turku, Finland
|
Post by Tero75 on Jan 23, 2013 19:34:11 GMT 1
E powered N10 has no frame like A powered N10. The engine brackets are all attached to body.
|
|
|
Post by Al Ramone on Jan 23, 2013 21:10:08 GMT 1
well there you go then. find a A14 or A15 for a fairly straight forward upgrade.
mind you, i found the A12 1200 engine in my F11 120A coupe to be quite a bit faster then the 100A i had and also was very good on fuel as well.
|
|