pj810
club Member
Posts: 23
|
Post by pj810 on Feb 13, 2015 22:28:46 GMT 1
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 14, 2015 4:06:23 GMT 1
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 14, 2015 4:07:34 GMT 1
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 14, 2015 4:09:16 GMT 1
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 14, 2015 4:10:14 GMT 1
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 14, 2015 4:11:08 GMT 1
|
|
|
Post by Al Ramone on Feb 14, 2015 8:42:32 GMT 1
excellent, good luck with it. Is it a 4 or 6 cylinder engine?
|
|
|
Post by gainsb1 on Feb 14, 2015 18:58:29 GMT 1
You're a lucky person..... having a solid looking base for restoration AND a huge garage to do it in. Door cards might be tricky to find (unless you took them off yourself )
Keep posting.
Leigh (Area rep)
|
|
pj810
club Member
Posts: 23
|
Post by pj810 on Feb 16, 2015 11:43:10 GMT 1
It's a 4 cylinder original but I'm putting an rb26 inn. The door card are a little banged up but I can make new ones easy.
|
|
pj810
club Member
Posts: 23
|
810 180b
Feb 16, 2015 11:46:53 GMT 1
via mobile
Post by pj810 on Feb 16, 2015 11:46:53 GMT 1
And yes @ gainsb1 the garage is really huge it has 2 vans and 3 cars in it atm!
|
|
pj810
club Member
Posts: 23
|
810 180b
Feb 16, 2015 11:51:16 GMT 1
via mobile
Post by pj810 on Feb 16, 2015 11:51:16 GMT 1
Oh am also putting an s14 rear end on it,has it every been done?. And what's the widest wheel anyone's put on these?, I wonna put 17x8.5 front and 17x10 rear
|
|
datman
Senior Member
Posts: 799
Location: West Sussex/Surrey
|
Post by datman on Mar 11, 2015 20:27:01 GMT 1
Nice project. 10" will not fit. I do not even think 8.5" will fit. Standard tyre on 810 is 165, the rims are only 5 or 5.5". 7 inch will fit if correct offset. I have some new and used parts for 810, maybe I have the interior parts that you need. I can ship internationally.
|
|
|
Post by antdat on Mar 11, 2015 21:20:57 GMT 1
I have 8's on my 180B 225/45/17 tyres thats as wide as you will get on there
|
|
LaurelLad
club Member
Posts: 76
Location: Netherlands
|
Post by LaurelLad on Mar 11, 2015 21:29:35 GMT 1
Looks like a nice project, good luck restoring it! I wish we had such a big garage :-)
|
|
pj810
club Member
Posts: 23
|
810 180b
Mar 12, 2015 13:03:28 GMT 1
via mobile
Post by pj810 on Mar 12, 2015 13:03:28 GMT 1
Thanks.I really do need alot of interior parts.as for the wheel I've fitted 9.5 on a couple 910s so i think i should be able to go wider the 8.love your car BTW
|
|