|
Post by cherrye10 on Oct 13, 2012 20:56:39 GMT 1
hello guys, got a one-owner 1975 4 door back in December 2010. Since then I resprayed it, new front seats, a host of new suspension parts, and a set of bargain wheels(not my favourite, but were quite cheap and look good on her) Got some corrosion in the cyl head, so at the moment, engine is out and will take the opportunity to de-rust and de-grease the engine block and treat the engine compartment. Entire front subframe will be next to go to the blaster and galvanizer, followed by conversion to disc brakes. will post more pics soon Attachments:
|
|
datman
Senior Member
Posts: 799
Location: West Sussex/Surrey
|
Post by datman on Oct 13, 2012 23:19:16 GMT 1
cool. i think all our e10s here had disc but maybe the wagon had drums?
|
|
|
Post by Al Ramone on Oct 14, 2012 9:21:52 GMT 1
my E10 had discs and they were awful.
hopefully your fitting discs from a later model and the servo that goes with them?
my F11 120A coupe had ok brakes. i think the N10 ones would fit as well.
|
|
|
Post by cherrye10 on Oct 19, 2012 20:53:11 GMT 1
my E10 had discs and they were awful. hopefully your fitting discs from a later model and the servo that goes with them? my F11 120A coupe had ok brakes. i think the N10 ones would fit as well. yes the n10 ones fit. possibly even those from an 80s micra. what about the valve cover paint code?
|
|
tommygoldy
club Member
Posts: 191
Location: North London
|
Post by tommygoldy on Nov 10, 2012 22:44:36 GMT 1
my E10 had discs and they were awful. Mine aren't all that bad... No worse than minis or 1100s from the same period. Depends what you're used to.
|
|
|
Post by cherrye10 on Nov 21, 2012 10:37:41 GMT 1
cylinder head trouble Attachments:
|
|
|
Post by cherrye10 on Nov 21, 2012 10:39:39 GMT 1
more corrosion Attachments:
|
|
|
Post by cherrye10 on Nov 21, 2012 10:40:56 GMT 1
block's out Attachments:
|
|
|
Post by cherrye10 on Nov 21, 2012 10:41:41 GMT 1
engine parts fresh from blaster Attachments:
|
|
|
Post by cherrye10 on Nov 21, 2012 11:37:56 GMT 1
a sneak preview of the motor once assembled Attachments:
|
|
|
Post by cherrye10 on Nov 21, 2012 11:43:28 GMT 1
while motor's out; 'CIRASA' will undergo a complete facial Attachments:
|
|
|
Post by cherrye10 on May 5, 2013 14:16:56 GMT 1
hi its been six months since 'CIRASA' is off the road, but in the meantime, I did plenty of work on it. but less talk and more pics.
|
|
|
Post by cherrye10 on May 5, 2013 14:19:04 GMT 1
more pics
|
|
|
Post by wombatracing on Jul 26, 2013 13:03:33 GMT 1
Great looking car.
|
|
|
Post by gainsb1 on Jul 26, 2013 23:39:17 GMT 1
my E10 had discs and they were awful. Mine, too. No servo.
Leigh (Area rep)
|
|