|
|
Post by Damien4884 on Nov 7, 2012 18:44:45 GMT 1
Anyone got a set of them they could measure up?
Would like to know the overall length, inner length, overall height and inner height and confirm the depth is about 65mm with pictures if possible.
|
|
Eric
club Member
Posts: 197
Location: Heerhugowaard - Netherlands
|
Post by Eric on Nov 7, 2012 19:07:43 GMT 1
i have a set in my garage but i wont be there before monday
|
|
|
|
Post by Damien4884 on Nov 7, 2012 19:54:44 GMT 1
Im in no rush, as and when is fine with me!
|
|
|
|
Post by datsfun on Nov 7, 2012 22:47:42 GMT 1
ZG flares , meant for an S30 may be a bit too big (diamter wise) on a 810 ( assuming that is their destination). I have tried them on a PA10 and didnt like how the lower part of the arch sat... However you can buy a smaller (diameter, depth etc) version of the ZG overfenders. Same style, but much better fit.  |
|
|
|
Post by Damien4884 on Nov 8, 2012 8:52:27 GMT 1
I've got measurements of quite a few "universal style" arches and they are not big enough to meet the edge of arch at the sides, so was looking at modifying a set of ZG's to fit. They don't look too bad on this:  Those wheels are 16" The wheels im thinking off will stick out like this on mine:  So had a play and would like to fashion or buy something like this:   (except made out of something other than flimsy card!) Unless you know of some more suitable ones? |
|
|
|
Post by Al Ramone on Nov 8, 2012 20:17:32 GMT 1
the ones on the 510 look good. so they're meant for S30's then? can you get them at a decent price?
|
|
|
|
Post by Damien4884 on Nov 8, 2012 21:45:07 GMT 1
Those ones are meant for s30's.
Price depends on what you call decent, the recommended good UK made sets are £180, you could get a set in from US but that would be around £150 shipped plus import taxes.
I don't know if its worth the risk for something that might not fit. It would look cool as though!
|
|
|
|
Post by Al Ramone on Nov 8, 2012 22:05:54 GMT 1
are they fibreglass or plastic?. if plastic and well made then thats not bad price imo.
|
|
|
|
Post by Damien4884 on Nov 9, 2012 17:38:01 GMT 1
The ones i'm looking at are fibreglass from a mould of an original set (i dont think that makes much odds to me seeing as how i'll be modifying them to fit anyway)
|
|
|
|
Post by datsfun on Jan 6, 2013 23:38:21 GMT 1
Here is what I have, these are fibreglass and don't drop down to sills but 3/4 lenght  Arch diameter  Height  Depth  This is how they look....trial fit done a few years ago   Old Sokol measurements done some time back ....just found the pic  Hope this helps.... |
|
|
|
Post by Al Ramone on Jan 6, 2013 23:43:18 GMT 1
what are those and where'd you get em?
you've tried em on an A10?
|
|
|
|
Post by datsfun on Jan 6, 2013 23:53:34 GMT 1
what are those and where'd you get em? you've tried em on an A10? Yep see pic. Good fitment especially on the four door as the arch lines up nicely...obviously as with everything universal there is a bit of messing to be done to get 100% result. My mate has these on his A10 coupe and before you ask, don't have any pics yet. He will be running 10j rears ;D |
|
|
|
Post by Al Ramone on Jan 7, 2013 8:43:52 GMT 1
wanna sell em? they look smaller then the ones i have.
|
|
|
|
Post by Damien4884 on Jan 7, 2013 10:31:07 GMT 1
Only just seen this i'll have a measure up
|
|
